SCROLL DOWN FOR OUR HOODLIFTS, TAILGATE STRUTS AND PACKAGE DEALS!
LIFT THE HOOD OF YOUR JEEP WITH JUST ONE HAND. FINALLY SOMEONE MADE AN ASSIST TO LIFT AND HOLD UP THE HOOD!NO MORE FOOLING WITH THAT AWKWARD AND DANGEROUS PROP ROD!MANY HAVE SAID THIS IS THE WAY JEEP SHOULD HAVE DONE IT AT THE FACTORY.
Note, the gas spring (that looks like a shock) is slanted downward. This lets the oil in the spring lubricate the seal plus gives you the dampened stop at the end of the stroke. If the spring is level or the big end down, the oil may not lubricate the seal or dampen the end of the stroke. This will shorten the life of the spring and puts unnecessary stress on everything.
Three strengths to match your application.
Standard for, well, standard sized sparesand those with no spares attached to your tailgate.
Medium for spares attached to the tailgate that are larger than standard and up to 35"
Heavy Duty for spares that are attached to the tailgate and are more than 35" or heavy stuff attached to your tailgate.
The heavier the spring, the faster it will push the tailgate, so always control the opening speed by holding it as it opens.
Check the drop-down menus below before you buy.
Save $19.90 on a package deal! Get the JK HoodLift and the JK Rear Tailgate Strut together. Only $125.00 + $15 shipping.First button is for JK's with factory hoods. Be sure to select the tailgate strut that suits your application by clicking the down arrow next to the description.
Same great savings, but for heavier hoods such as the AEV Heat-Reduction Hood. Be sure to select the tailgate strut that suits your application by clicking the down arrow next to the description.
To order, call direct to1-800-579-3024 or click on the Buy Now buttons
Lifetime guarantee.
These are the quality products that have been installed in thousands of Jeeps since 1998. The gas springs (or Struts, or shocks....) are the best available and what many OEM manufacturers put in their factory products. Lifetime guarantee! If something fails, HoodLift will replace it. Easy to install, clear instructions.